Refrigeration and freezing walk-in cooler is generally divided into refrigeration and freezing, and the other is that refrigeration and freezing can be carried out at the same time. According to customer needs, it can be divided into different refrigeration rooms, mainly using water in solid-liquid phase change Release or absorb a large amount of latent heat at a time. At the same time, the large amount of latent heat released during freezing is used to maintain the fruits and vegetables in the warehouse from freezing damage; in summer, the ice is used as a cold source to maintain the necessary low temperature and high humidity conditions for fruit and vegetable storage.

　　refrigeration and freezing

walk-in cooler work defrosting is a refrigeration cycle, and heating is before defrosting. The principle of the freezer is: Freon absorbs heat from the outside and releases it into the room during the summer cooling. . At the same time, the hot air blown from the indoor unit during heating in winter, and the cold air blown from the outdoor unit, each manufacturer does everything possible to reduce the attenuation to the maximum level. Especially for fluorine system machines, this is not to say that fluorine system machines are not good and therefore must be defrosted. Have owners who have done fluorine system central air-conditioning find that when heating in winter, the indoor unit suddenly stops turning and sometimes it can still hear The machine has a   clicking   sound. The walk-in cooler water unit has a small temperature difference between the inlet and outlet water, and the indoor unit has a large air volume. And in winter, there will be no dry feeling like the fluorine system machine because of the high evaporation temperature of On Leon. It can play a great role in heating and defrosting. When the water unit is defrosting, let's talk about the heating of the water unit. Larger water units generally use two compressors.

　　 refrigerated and frozen walk-in cooler thermostat is a product designed for freezing walk-in cooler, etc. It has a beautiful appearance. The panel is separated from the control box and can directly drive a 2HP compressor. The user and manager menus are separated, which is convenient for ordinary users to simplify operations, while allowing managers to flexibly deal with different equipment conditions. The main products include microcomputer temperature and humidity controllers, temperature (data) recorders, embedded temperature display meters, refrigeration unit electrical control boxes, digital thermometers and hygrometers, intelligent halogen leak detectors, and more than 300 models in six series, which are widely used in food Cold chain, medical cryogenic equipment, HVAC, aquarium equipment and other industries. Refrigeration and freezing walk-in cooler is a product specially designed for freezing walk-in cooler, etc. It has a beautiful appearance. The panel is separated from the control box and can directly drive a 2HP compressor. The user and manager menus are separated, which is convenient for ordinary users to simplify operations, while allowing managers to flexibly deal with different equipment conditions.

　　The walk-in cooler has a wide range of uses, from supermarket food to industry to medical care. According to different cooling effects and use environments, walk-in coolers have their own structure and principles.

The internal principle of freezing and refrigeration is relatively simple: the moment it enters the freezer-refrigerator, the potential for low-temperature freezing and refrigeration is endless: more and more frozen and refrigerated products are sold in small pieces. Convenience store display cases all use distributed freezing and refrigeration. Liquid nitrogen boils and carbon dioxide sublimates. The energy (heat) required for this process is obtained from the food, which causes the food to be cooled and eventually frozen.

　　The preservation of tea is very important. The main factors that cause the discoloration and deterioration of tea are temperature, moisture, air and sunshine, and new teas have been launched one after another. Therefore, we need to learn how to keep the tea fresh with the display cooler in the supermarket. In addition, peculiar smells can also cause qualitative changes. Oxygen in the air is the main cause of tea decay. High temperature and humidity accelerate the oxidation and decay catalysts. Deoxygenating preservatives can inhibit the oxidation of tea leaves. Therefore, if used properly, you can get good results. refrigerated showcase supermarket display cooler has the function of refrigerating or freezing, suitable for storage of different items, embossed aluminum plate material is used in the cabinet, which is corrosion-resistant and easy to clean, and does not pollute food. The side plate is powdered galvanized steel plate, which is convenient for cleaning It is durable, mechanical temperature controller, convenient adjustment, stable temperature control, integral polyurethane foam, unique sealing design, safe, power-saving and beautiful.

　　Supermarket display cooler The deoxidizing preservative depends on the amount of tea packaging. It is best to squeeze out the air when the tea is sealed, and the operation is in place: the preservative can be placed on the tea bag. It must be sealed and airtight. If the air leaks, the effect will be lost. After using the remaining preservative, the outer packaging bag should be sealed immediately, otherwise the preservative will absorb oxygen and heat and reduce the use effect. For the storage period of less than six months, the supermarket display cooler is the most economical and effective to maintain 0-5 degrees Celsius; for the storage period of more than half a year, freezing (-10 to -18 degrees Celsius) is better. It is best to store it in a special tea supermarket display cooler. If it is necessary to keep it fresh with other foods, the tea should be properly packaged and completely sealed to avoid odor absorption. The air circulation in the cabinet is good and the cooling effect has been achieved.

　　 When buying a large amount of tea at one time, it should be divided into small bags (cans) first, and then put into the supermarket display cooler. Take out the required brewing volume each time. It is not advisable to repeatedly freeze and freeze the same tea bag.

　　The higher the temperature, the faster the tea quality changes. With an average increase of 10°C, the browning speed of tea will increase by 3 to 5 times. If the tea is stored in a place below 0℃, the aging and quality loss of the tea can be suppressed. When taking out tea leaves from a display cooler in a supermarket, the temperature of the tea leaves in the tea can should be raised to a similar room temperature before taking out the tea. If you open the tea can suddenly, the tea is likely to condense moisture and increase the water content, so that the tea is not finished. Tea accelerates deterioration.

　　convenience store walk-in cooler cabinet is equipped with evaporator, condenser and compressor. The price of walk-in cooler is also determined by the quality of these main structures. Convenience store walk-in cooler cabinets have shelves, which are characterized by curved glass panels on the front and top of the display cooler part, and glass sliding doors at the back that can slide along the slide, and the two sides have corresponding shapes. glass plate. The sliding door can be opened freely on its slide, and is equipped with a curved front glass plate, which is conducive to display and convenient to use. Due to its miniaturization, it can be applied to small food convenience stores and retail stalls.

　　 such as the convenience store walk-in cooler cabinet puts high moisture food or opens the door too many times, etc., can cause excessive frost on the inner wall of the display cooler, and the amount of frost inside the display cooler depends on the humidity in the cabinet The size is related. The price of walk-in cooler should also be balanced according to various aspects such as cooling method. Convenience store walk-in cooler The frost on the inner wall is not as much as possible, it should be as little as possible, because the heat transfer coefficient of frost is low, if the thickness of the frost layer exceeds 10mm, the cooling effect will be significantly reduced. Therefore, it is found When the frost layer on the inner wall of the display cooler exceeds 10mm, defrost it.

　　 is to set the evaporator pipe inside the inner wall of the insulation layer. The convenience store walk-in cooler includes the cabinet, the refrigeration system, the electric control device and the rack. The feature is to put the evaporator outside the original insulation layer of the refrigeration system into the cabinet insulation layer. And close to the inner wall panel. The display cooler evaporator is changed from an external insulation layer to a built-in insulation layer, eliminating the forced air-cooling cycle of the fan, and changing air-cooling to direct-cooling. Convenience store walk-in cooler not only guarantees the preservation and refrigeration of food and other commodities , And the manufacturing interest is reduced, the production cycle is shortened, the direct cooling power consumption is reduced, the noise is reduced, the cooling speed is accelerated, the failure rate is reduced, the use and maintenance are convenient, and the fresh food is effectively prevented from being air-dried, which protects the interests of merchants and is convenient To improve the shopping environment. The price of walk-in cooler is also the most reasonable.

　　 refrigerated showcase Refrigeration Equipment Co., Ltd. is a professional manufacturer of commercial refrigeration equipment integrating R&D, design, manufacturing and sales. The company has advanced production equipment, a strong scientific research team, professional technical personnel, modern management and a complete after-sales service system. Among them, the convenience store walk-in cooler is unique in design, excellent in craftsmanship, exquisite materials, luxurious in appearance, excellent in quality and long-lasting, and technology is steadily leading. Relying on long-term accumulated technological advantages, the company continues to develop and innovate products, gain the best of others, and pursue both internal and external excellence. At present, the commercial refrigeration equipment produced by our company includes four series: supermarket, convenience store, KTV display cooler series, stainless steel refrigeration equipment series for hotels and restaurants, cake and bakery equipment series, and four series of freezing and fresh-keeping cold storage.