Inferior and low-cost medical display cases have poor performance, specifically in three aspects:

　　A: Medical display cases have low cooling power. The matched unit power is about 30% to 40% smaller. Usually 1.0 cubic four-door medical display cases match 1/2HP compressor, while the low-cost four-door medical display cases are equipped with 1/3 or 3/8HP compressor.

　　B: Medical display cases have high cooling temperature. The working temperature signs are chaotic, and some are marked at 0 degrees. Users actually report that the cabinet temperature in summer is about 8 degrees to 12 degrees. This brings safety hazards to the preservation of medicines that require a constant low temperature environment.

　　C: Medical display cases have slow cooling speed. Because the compressor power of these low-cost medical display cases is small, the condenser area, condenser fan power and air volume, and evaporator area that match the system are reduced accordingly. That is to say, the cooling capacity is small, so the cooling speed is slow. If such display cases and medical display cases are only used in winter, spring, and autumn, or only used in the north, they can cope with it carelessly. Conversely, due to the high temperature during the day and night of the display cases in summer, or the large amount of medicines loaded, the temperature of the display cases cannot be lowered, and the hygiene and safety of the stored medicines cannot be guaranteed. Therefore, in order to avoid this situation, you might as well know some brand information of some existing medical display cases in my country, so as to reduce the possibility of buying fake and inferior products.

　　 refrigerated showcase display cases Specializing in creating energy-saving, environmentally-friendly, new-style display cabinet series, high-efficiency, energy-saving, healthy and environmentally friendly, durable and fashionable. Consulting Hotline: 4006-300-692  Website: www.ihdjx.com