There are many things to pay attention to when using medical display cooler, many of which are small details that consumers don’t know much about. refrigerated showcase consulted some experts. Experts said that the display cooler cabinet is in use It is not advisable to plug and unplug the power at will. Why is this?

　　 In normal use, the temperature in the display cooler is low to a certain value, and the thermostat automatically cuts off the power supply. At this time, the pressure of the refrigerant is already very low, which is relatively small compared to the load compressor of the motor. Easy to start normally.

　　 If the power supply is forcibly cut off, the medical display cooler is turned on immediately when the refrigerant has a high pressure. The high voltage causes the motor to be overloaded, and the starting current is 20-30 times the normal value, which is likely to be caused by the current The motor is too large to burn out. Therefore, the medical display cooler should not be plugged in and out at will. When it is necessary to cut off the power, it should also pass 3 minutes later (after the high and low pressure of the refrigeration system reach equilibrium), and then reconnect the power.

　　 The   refrigerated showcase   brand display cooler produced by this company is designed and manufactured from factors such as material selection, appearance structure, refrigeration effect, safety and energy saving, maintenance, practicality and convenience. People from all walks of life are welcome to call or write to consult and order, Tel: 4006-300-692   Official website: www.ihdjx.com