supermarket refrigerated showcase » article > walk-in display coolers > Walk-in cooler evaporator inlay and production (eight)
Walk-in cooler evaporator inlay and production (eight)
author: supermarket refrigerated showcase category: walk-in display coolers Views: 944Time: 2016-08-22
walk-in cooler evaporator inlay and production (eight)
drawer walk-in cooler inlaid evaporator, the inlay method is basically the same as that described in five, but inlay The refrigerated evaporator must be fixed in the drawer bracket slot, and then embedded in the freezer compartment.
self-made electric walk-in cooler evaporator installation
installation method is basically the same as walk-in cooler self-made evaporator, just pay attention to the following three points:
① walk-in cooler body drilling position should be on the side of the original evaporator so that the return pipe The connection distance between the evaporator and the compressor and the capillary is the smallest;
②The capillary should be welded to the evaporator to reduce resistance, noise, and compressor load. In addition, the capillary should be placed inside the evaporator to avoid picking and placing items. Damaged;
③Due to the sinking of the air conditioner, when reshaping the evaporator, the distance between the copper pipes should be smaller and the lower part should be larger, and the copper pipes should be fixed while shaping. The tube is as close as possible to the body of the walk-in cooler.
Homemade evaporator method The so-called homemade evaporator is to bend the copper tube into a certain shape and fix it in the walk-in cooler. The self-made evaporator generally uses 8mm copper tube, and the quality depends on the size of the walk-in cooler. For a 180L～230L walk-in cooler, 2.5k is generally required.
Walk-in cooler evaporator According to the size of walk-in cooler, prepare several (generally 2.5kg) copper tubes with a diameter of 8 mm. According to the size of the walk-in cooler for freezing and refrigeration, use a bending device to first bend the copper pipe into a U-shape or W-shape, and reserve a certain length for the two pipe ports; then shape the freezer compartment evaporator into II or back to . The area of the refrigerated evaporator is slightly larger than the original evaporator, and the depth of the refrigerated evaporator is equal to the depth of the original freezer compartment 1 cm-2 cm, and the three sides should be close to the left, upper and right inner bladder of the freezer. Generally speaking, the refrigerated evaporator is manufactured first, and the refrigerated evaporator is manufactured later.
The above articles are from refrigerated showcase walk-in cooler and walk-in cooler prices. For details, please visit: www.ihdjx.com
free order hotline: +86 1801956n
>>>
>n
LAST：mouth.
with evaporator interface box display cases built-in self-made evaporator because this model can see the capillary and evaporator interface, the original capillary can continue to be used, the display cases are generally eye-catchingNEXT：Safety requirements for the use of steel cylinders in display cases
keywords：
Ranking of similar articles
- Refrigerated showcase display cooler written commercial display cooler legend
- Hairy crabs freezer frozen taste more fresh
- How hairy crabs fresh refrigerated showcase display cooler tell you
- Refrigerated showcase walk - in the cooler is icy
- refrigerated showcase commercial refrigeration The function of each component
- Supermarket supermarket refrigerated showcase of fresh-keeping of supermarket refrigerated showcase refrigeration technology
- display cases Cooling difference analysis of secondary faulty machine
- refrigerated showcase display cooler Explain the characteristics of food raw materials (3)
- Display cooler refrigeration failures and maintenance methods (ten)
- Supermarket refrigerated showcase non-stop or abnormal opening and shutdown
- display cases Inlay and production of evaporator (10)
- display cases Capillary disassembly, diagnosis and maintenance
- Display cases Intercooler failure and analysis (2)
- walk-in cooler refrigeration failure and maintenance method (4)
- When buying a freezer to see performance metrics
- display cases Refrigeration failures and maintenance methods (2)
- Supermarket walk - in cooler how walk - in cooler fresh vegetables
- My mama ah!The fruit fresh tank is too beautiful!
- display cases refrigeration failures and maintenance methods (eight)
- refrigerated showcase supermarket refrigerated showcase explains the characteristics of food ingredients (4)
Latest news articles
- May 2011 refrigerated showcase Qingyuan Tour
- refrigerated showcase Refrigeration Equipment Co., Ltd. growth process
- Refrigerated showcase major sales walk - cooler in class
- Refrigerated showcase display cooler written commercial display cooler legend
- Refrigerated showcase walk - in cooler energy-saving progresses steadily
- 2012 take care of the old man from the supermarket refrigerated showcase
- refrigerated showcase Tip: Which fruits are not suitable for placing in the fruit refrigerated showcase
- Dragon fruit reveals ark makes pitaya ornamental fruit
- Watermelon fresh-keeping refrigerator can better preserve the nutrients of watermelon
- Represent the frozen watermelon fruit for storage
- Hairy crabs freezer frozen taste more fresh
- How hairy crabs fresh refrigerated showcase display cooler tell you
- Large supermarket display ark how to choose the right goods
- Small convenience store owner should show how to choose the convenience stores ltd. refrigeration
- Refrigerated showcase ltd. refrigeration has been a leader in innovation and energy saving
- In September 2012, refrigerated showcase west chung
- Refrigerated showcase walk - in cooler cleaner which aspects should be paid attention to
- Correctly use refrigerated showcase supermarket refrigerated showcase the matters needing attention
- , a refrigerated display showcase meat cooler features of the product
- Refrigerated showcase walk - in the cooler is icy